Safety netting is used to protect workers from falling objects. Typically this means product falling out of a rack down onto a walkway or work area.

All nets supplied are manufactured and tested in accordance with industry standards, and to strict ANSI standards as identified in ANSI A10.11. The nets are tested until a single strand breaks, not until the entire net fails. The actual weight is then cut in half, thereby providing a safety factor of 2.

Features

• Designed to fit the specific job requirements.
• Offset hardware designed specifically for each project to allow pallet overhang.
• Extension hardware available to allow protection for items stored above the height of the frame.
• Standard systems utilize ¼” Galvanized cable, turnbuckles, wire rope clips / thimbles, eye-bolts and spring snap hooks,
• Standard net panels are designed to cover no more than 3 bays at a time.

Offset / Flush-mount brackets

• Steel bracket with positioning holes at predetermined positions.
• U-bolt mounting hardware for attachment to frames.

Hardware

• Spring loaded snap hooks typically spaced every 12” - 15” around perimeter.
• 3/8” x 4-1/2 eye-bolts.

The netting can also be used in many other applications such as under conveyors, pallet flow etc. It is installed horizontally to protect workers on levels below within pick modules etc.

For a quotation, please complete the Safety Netting Questionnaire and either submit by email or print and fax it to 905-670-1710.